The level probe measures the level of liquids continuously and hydrostatically. In ventilated tanks, filling heights from 0.5 to 16 mH2O can be achieved. The level probe is used, among other places, in water and wastewater management, electroplating baths, and in containers with aggressive media such as acids and lyes.
| general technical data | |
|---|---|
| Measuring range | 50 mbar to 1.6 bar (0.5 bis 16 mH2O) |
| Medium temperature | -20 to +60 °C |
| Accuracy (linearity) | ±0.2 % |
| Output signal | 4 to 20 mA, two-wire; 0.5 to 4.5 V three-wire |
| Housing material | Stainless steel or PTFE |
| Cable material | PE, FEP, PUR |
| Additional equipment | Temperature sensor (stainless steel version), overvoltage protection (stainless steel version), reverse polarity protection |
| Protection type | IP68 |
| Approval | Drinking water approval (ACS, PZH); metrological certificate; EAC |
| Declaration of manufacturer | CE |
| Application areas | Outdoor or indoor mounting, diesel, heating oil, rainwater, car washes, wastewater, seawater, caustic soda (20 %, 20 °C), sulphuric acid (50 %, 20 °C) |
456.09 KB, JUMO-digiLineCRCi-20190503-IODD1.0.1.zip
Version: 393_20190503_IODD_1.0.1
,
Datum: 1/23/2020
458.33 KB, JUMO-digiLineCRCi-20190503-IODD1.1.zip
Version: 393_20190903_IODD_V1.1
,
Datum: 1/23/2020
52.69 MB, German, English, Spanish, French
Version: 360.02.xx/3.07J
,
Datum: 12/12/2023
52.69 MB, German, English, Spanish, French
Version: 360.02.xx/3.07J
,
Datum: 12/12/2023
646.55 KB, English
1/21/2020
678.56 KB, English
11/16/2021
We will assist you with your project and provide you with an offer tailored to your personal needs.
Team Sales
We care about your problems and will find solutions for you. We are also the contact persons for startup, repair, maintenance and calibration.
Team Service
